ABS Tianjin Dagu DG-417 Injection Molding Resin Tác Động Cường Độ Cao Thiết Bị Điện Tử Đồ Gia Dụng Đồ Chơi
5
68.700đ
24.500đ
64.3% giảm giá

ABS Tianjin Dagu DG-417 Injection Molding Resin Tác Động Cường Độ Cao Thiết Bị Điện Tử Đồ Gia Dụng Đồ Chơi

5
68.700đ
24.500đ
64.3% giảm giá
Thông số sản phẩm
ABS
sN8ELfgTCq
Mô tả sản phẩm
Nơi xuất xứ: Tianjin, ChinaNhãn hiệu: Tianjin dagu

Số Mô Hình: DG-417Place of Origin: Tianjin,China

Model Number: DG-417Material: ABS

Appearance: granularPacking: 25kg/bag

MFR: 15.5Density: 1.045

Grade: Injection molding gradeColor: Milky white

Port: Ningbo and Shanghai




Overview
Place of Origin
Tianjin,China
Brand Name
Tianjin dagu
AModel Number
DG-417
Material
 ABS
Appearance
granular
MFR
15.5
Grade
Injection molding grade
Density
1.045
CERTIFICATE
ISO SGS
MOQ
25 kg
Specification
Performance of the project
Test condition [condition]
The test method
The test data
The data unit
Mechanical properties of
The tensile strength
1/8",50mm/min
ASTM D-638
510
kg/cm2
Tensile rate
1/8",50mm/min
ASTM D-638
40
%
The bending strength
1/8",1.3mm/min
ASTM D-790
770
kg/cm2
Bending modulus
1/8",1.3mm/min
ASTM D-790
25180
kg/cm2
Izod impact strength
1/8",23℃
ASTM D-256
25
kg.cm/cm
Rockwell hardness
ASTM D-785
112
R Scale
Thermal performance
Thermal deformation temperature
1/8",1.8MPa
ASTM D-648
80
Vica softening point
1kg
ASTM D-1525
99
Heat of combustion
1/8"
UL 94
HB
Physical properties of
Melt index
220℃/10kg
ASTM D-1238
15.5
g/10min
The proportion of
23℃
ASTM D-792
1.045
Forming shrinkage rate
ASTM D-955
0.5-0.8
%
Details Images

ABS profile

ABS plastic has the common performance of three kinds of components, A makes it resistant to chemical corrosion, heat resistance, and has A certain surface hardness, B makes it has high elasticity and toughness, S makes it has the processing and forming characteristics of thermoplastic plastic and improve the electrical performance. Therefore, ABS plastic is a kind of raw material is easy to get, good comprehensive performance, cheap, widely used "tough, hard, rigid" material. ABS plastics have been widely used in machinery, electrical, textile, automobile, aircraft, ship and other manufacturing industries and chemical industry.

General Performance of ABS

The appearance of ABS is opaque and ivory color granule, non-toxic, tasteless, low bibulous rate of its products can be into a variety of colors, and has 90% high gloss. ABS has good combination with other materials and is easy to surface printing, coating and coating treatment. ABS, a flammable polymer with an oxygen index of 18.2, has a yellow flame, black smoke, charred but not dripping, and gives off a distinctive cinnamon smell.

Mechanical properties of ABS

ABS has excellent mechanical properties, its impact strength is good, can be used at very low temperature. Even if ABS products are damaged, it can only be tensile damage but not impact damage. ABS has excellent wear resistance, good dimensional stability, and oil resistance. It can be used for bearings under medium load and speed. The creep property of ABS is greater than that of PSF and PC, but less than that of PA and POM. The bending strength and compression strength of ABS are poor among plastics. The mechanical properties of ABS are greatly affected by temperature.

Thermal properties of ABS

ABS is an amorphous polymer with no obvious melting point. Melt viscosity is high, poor mobility, poor weather resistance, ultraviolet light can make discoloration; The thermal deformation temperature is 70 -- 107℃ (about 85 ℃), and the product can be increased by about 10℃ after annealing treatment. Sensitive to temperature and shear rate; ABS can still show certain toughness at -40℃, and can be used for a long time in the temperature range from -40℃ to 85℃.
Product packaging
Supply Ability:
Supply Ability 50 Ton/Tons per Day


Packaging & Delivery:
Packaging Details 25kg/bag
Port SHANGHAI AND NINGBO
Picture Example:
Lead Time:
Quantity(kilograms)
1 - 100000
>100000
Est. Time(days)
7
To be negotiated
Company Profile
FAQ
Sản phẩm liên quan
Bán chạy
Chat