Bộ Dụng Cụ Sửa Chữa Lốp Xe Không Săm 12 Món Deluxe Bộ Dụng Cụ Khẩn Cấp Đa Năng Vỏ Nhựa Đóng Gói Xe Máy Xe Cộ
5
99.200đ
61.000đ ~ 99.200đ

Bộ Dụng Cụ Sửa Chữa Lốp Xe Không Săm 12 Món Deluxe Bộ Dụng Cụ Khẩn Cấp Đa Năng Vỏ Nhựa Đóng Gói Xe Máy Xe Cộ

5
99.200đ
61.000đ ~ 99.200đ
Chọn loại hàng (ví dụ:màu sắc ,kích thước)
Thông số sản phẩm
gDYnRBznY1
Mô tả sản phẩm
Loại: Hand Tool, Tay Công CụVật liệu chính: Kim loại/nhựa

Kích: Tiêu chuẩnNơi xuất xứ: Zhejiang, China

Nhãn hiệu: GodesonBảo hành: 1 Months

Chất Liệu chính: Kim loại, nhựa, vvOEM: Chấp nhận được

Xử lý bề mặt: ChromeĐóng gói: Nhựa trường hợp

Tên sản phẩm: Khẩn cấp Sửa Chữa LốpMàu sắc: Màu xanh, Chrome, vv.

Cách sử dụng: Sửa chữa lốp xeKit bao gồm: 11 miếng




12 Pieces Deluxe Tubeless Tire Repair Kit Tools Set Kit Emergency Universal Puncture Plastic Case Packing Car Motorcycle Vehicle

RT108-12 12Piece auto tire repair kit Material: Metal / plastic / other

INSTRUCTION:
In case of air leakage, please confirm the following points:
1. Mark the punctured part of the tire and pull out the punctured object.
2. Use the tire repair probe to find out the penetration direction of the hole, and insert the suction along the hole direction to remove the dust and impurities in the hole Things.
3. Cut one end of the rubber strip into an oblique opening and thread it into the eyelet at the front end of the pin insertion
tool, so that the length of the rubber strip at both ends of the eyelet is basically the same agreement.
4. Insert the pin with rubber strip into the tire along the hole to ensure that the rubber strip is inserted 2 / 3 of the length
(cold repair must be determined)The rubber strip penetrates the carcass to avoid slipping out after inflation), and rotate the pin 360 degrees to pull out the pin.
5. For the remaining tire repair rubber strip outside the tire, leave 5mm length on the tread and cut off the rest.
PRECAUTIONS:
1. The hole breaking direction must be detected with a probe to ensure that the insertion direction and position of the adhesive
strip are consistent with the penetration direction of the nail hole Otherwise, air leakage will occur. For example, the angle
between the perforation direction and the tread is inclined by 50 degrees, and the probe and pin are inserted The inlet should
also operate along this slope.
2. After confirming that the rubber strip is enough to penetrate the tire, rotate the strip pin tool for one circle (360 degrees)
and pull it out to ensure that the rubber strip Squeeze the puncture wound and form a rotating knot in the tire to avoid air
leakage.
3. In case of deep oblique hole wound, the length of the rubber strip must be ensured to ensure that the rubber strip can
penetrate the tire
Bán chạy
product-image
61.000đ ~ 99.200đ
Số lượng
Số Mô Hình
Chat