Nhà Máy Bán Buôn Trực Tiếp Thiết Bị Máy Làm Cốt Thép Tốc Độ Cao Liên Tục Máy Cán Nóng Dây Chuyền Sản Xuất Để Bán
5
858.725.000đ
Yêu thích
Nhà Máy Bán Buôn Trực Tiếp Thiết Bị Máy Làm Cốt Thép Tốc Độ Cao Liên Tục Máy Cán Nóng Dây Chuyền Sản Xuất Để Bán
5
858.725.000đ
Nơi xuất xứ: Henan, ChinaNhãn hiệu: Hongteng
Loại: Cán nóng MillĐiều kiện: Mới
Video Gọi Đi-Kiểm Tra: Cung CấpMáy Móc Báo Cáo Thử Nghiệm: Cung Cấp
Tiếp Thị Loại: New Product 2022Bảo Hành Của Core Thành Phần: 1 Năm
Core Thành Phần: PLC, Động Cơ, Chịu Lực, Hộp Số, Động Cơ, Áp, Bánh Răng, BơmĐiện áp: 380-440 V
Công suất (W): 50-20000 KWKích thước (L * W * H): Not standard
Bảo hành: 1 NămKey Điểm Bán Hàng: Dễ dàng để Hoạt Động
Phòng Trưng Bày Trí: Ai Cập, Việt Nam, Philippines, Ả Rập Saudi, Pakistan, Mexico, Nga, Kazakhstan, Ukraina, Kyrgyzstan, Uzbekistan, MalaysiaÁp dụng Các Ngành Công Nghiệp: Vật Liệu xây dựng Cửa Hàng, Máy móc Cửa Hàng Sửa Chữa, Nhà Máy sản xuất, Nhà Sử Dụng, Bán lẻ, Xây dựng làm việc, Năng lượng & Khai Thác Mỏ, Other
Trọng lượng (KG): 11500Final rebar size: 8-32mm
Capacity: 5-15ton/hourCooling way: Water
Delivery Time: 30-45 Working DaysFinished product: steel rebar, steel rod, wire rod,angle steel
Applicable materials: steel billetBillet Size: 60-150 Square Millimeter
Advantages: Low Maintenance CostCertification: ISO9001 , CE
Type: Automation
Turnkey Project Small Steel Rebar Rolling Mill production Line
Product Description
Hot rolling mill is mainly used in iron and steel plants to produce special-shaped bars, wires, channel steel, flat bars, steel plates and other products.
1. Hot rolling mill is mainly used in iron and steel plants to produce steel bar, special-shaped bars, wires, channel steel, flat bars, steel plates and other products. The raw material is steel scrap or billet (40-100mm).
2. The small production capacity of 0.5- 5t/h is the standard product of our company.
3. The diameter of the steel bar of the final product: 8-32mm, the length: 3000-12000mm.
Customer site
Hot rolling production lines for deformed bars are divided into H Series small rolling mill and continuous rolling. The rolling type of continuous rolling is double groove and single line. It can reduce furnace scaling caused by secondary heating and improve the finished product rate by 0.3 ~ 0.5%.
Product Advantages
1, Provide overall solution and after-sales guarantee
2, Provide plant design, proposal, manufacturing, shipping, installation and commissioning services
3, Provide overall equipment layout, rolling mill process design, electrical circuit layout and other services.
4, Dispatch technicians to provide installation services after the machine arrives until the customer is satisfied
5, Long-term technical support, long-term machine warranty
2, Provide plant design, proposal, manufacturing, shipping, installation and commissioning services
3, Provide overall equipment layout, rolling mill process design, electrical circuit layout and other services.
4, Dispatch technicians to provide installation services after the machine arrives until the customer is satisfied
5, Long-term technical support, long-term machine warranty
Specification and Technical Parameter | ||||||||
Model | Power | Rolling Speed | Feeding Section | Rolling Specification | ||||
H220-2 | 95KW | 1.5-2 | 40*40mm | Φ10-24mm | ||||
H250-3 | 180kw | 1.8-2.5 | 50*50mm | Φ8-32mm | ||||
H250-4 | 315kw | 2.5-4 | 60*60mm | Φ8-32mm | ||||
Recommend Products
Why Choose Us
Certifications
FAQ
1: Are you the Manufacturer or a trading company?
We are direct manufacturer specialized in produce in machinery for 15 years.Our factory located in high industry zone,Luoyang city,henan province,where is the biggest industry machinery manufacturing base in china.
2: Why should we choose Hongteng?How do you ensure the quality?
We have professional research staff and strict in Production,inspection and debugging and package process.We always insist on supply good pre-sales,order following,after sell service for our customers.
We have professional QC person inspect machinery production.After production finished,all machines will be testing & debugging carefully before shipment.
3: Which kind of power supply do you supply? Electricity or gas?
Electricity, natural gas and LPG
4: How can I trust your company and machine?
Our factory have been in producing machinery for around 15 years ,our machine have exported to East Asia, South Asia, the middle East Asia, Africa etc. areas and have a good feedback with no complaints.
Welcome to visit us,and have a face to face negotiation.
5: How do you control the quality?
We have QC team comply with TQM to ensure the quality. Each step is in compliance to the standards. At the same time, we will take photos and shoot video for you if you need.
6: Which county do you exported to ?
We have already exported our machines to many famous company in many countries, such as
Vietnam, Indonesia, Myanmar, Qatar, Ukraine etc. Welcome customers to visit our factory.
7: How about your after sales service?
After customers get machines,We will send our engineers to customer's workshop.We will supply installation & debugging & training service for customers till machine normal production.
We are direct manufacturer specialized in produce in machinery for 15 years.Our factory located in high industry zone,Luoyang city,henan province,where is the biggest industry machinery manufacturing base in china.
2: Why should we choose Hongteng?How do you ensure the quality?
We have professional research staff and strict in Production,inspection and debugging and package process.We always insist on supply good pre-sales,order following,after sell service for our customers.
We have professional QC person inspect machinery production.After production finished,all machines will be testing & debugging carefully before shipment.
3: Which kind of power supply do you supply? Electricity or gas?
Electricity, natural gas and LPG
4: How can I trust your company and machine?
Our factory have been in producing machinery for around 15 years ,our machine have exported to East Asia, South Asia, the middle East Asia, Africa etc. areas and have a good feedback with no complaints.
Welcome to visit us,and have a face to face negotiation.
5: How do you control the quality?
We have QC team comply with TQM to ensure the quality. Each step is in compliance to the standards. At the same time, we will take photos and shoot video for you if you need.
6: Which county do you exported to ?
We have already exported our machines to many famous company in many countries, such as
Vietnam, Indonesia, Myanmar, Qatar, Ukraine etc. Welcome customers to visit our factory.
7: How about your after sales service?
After customers get machines,We will send our engineers to customer's workshop.We will supply installation & debugging & training service for customers till machine normal production.
Số lượng
Chọn loại hàng (ví dụ:màu sắc ,kích thước)
Thông số sản phẩm
JWsoSM7hv6
Mô tả sản phẩm
Nơi xuất xứ: Henan, ChinaNhãn hiệu: Hongteng
Loại: Cán nóng MillĐiều kiện: Mới
Video Gọi Đi-Kiểm Tra: Cung CấpMáy Móc Báo Cáo Thử Nghiệm: Cung Cấp
Tiếp Thị Loại: New Product 2022Bảo Hành Của Core Thành Phần: 1 Năm
Core Thành Phần: PLC, Động Cơ, Chịu Lực, Hộp Số, Động Cơ, Áp, Bánh Răng, BơmĐiện áp: 380-440 V
Công suất (W): 50-20000 KWKích thước (L * W * H): Not standard
Bảo hành: 1 NămKey Điểm Bán Hàng: Dễ dàng để Hoạt Động
Phòng Trưng Bày Trí: Ai Cập, Việt Nam, Philippines, Ả Rập Saudi, Pakistan, Mexico, Nga, Kazakhstan, Ukraina, Kyrgyzstan, Uzbekistan, MalaysiaÁp dụng Các Ngành Công Nghiệp: Vật Liệu xây dựng Cửa Hàng, Máy móc Cửa Hàng Sửa Chữa, Nhà Máy sản xuất, Nhà Sử Dụng, Bán lẻ, Xây dựng làm việc, Năng lượng & Khai Thác Mỏ, Other
Trọng lượng (KG): 11500Final rebar size: 8-32mm
Capacity: 5-15ton/hourCooling way: Water
Delivery Time: 30-45 Working DaysFinished product: steel rebar, steel rod, wire rod,angle steel
Applicable materials: steel billetBillet Size: 60-150 Square Millimeter
Advantages: Low Maintenance CostCertification: ISO9001 , CE
Type: Automation
Turnkey Project Small Steel Rebar Rolling Mill production Line
Product Description
Hot rolling mill is mainly used in iron and steel plants to produce special-shaped bars, wires, channel steel, flat bars, steel plates and other products.
1. Hot rolling mill is mainly used in iron and steel plants to produce steel bar, special-shaped bars, wires, channel steel, flat bars, steel plates and other products. The raw material is steel scrap or billet (40-100mm).
2. The small production capacity of 0.5- 5t/h is the standard product of our company.
3. The diameter of the steel bar of the final product: 8-32mm, the length: 3000-12000mm.
Customer site
Hot rolling production lines for deformed bars are divided into H Series small rolling mill and continuous rolling. The rolling type of continuous rolling is double groove and single line. It can reduce furnace scaling caused by secondary heating and improve the finished product rate by 0.3 ~ 0.5%.
Product Advantages
1, Provide overall solution and after-sales guarantee
2, Provide plant design, proposal, manufacturing, shipping, installation and commissioning services
3, Provide overall equipment layout, rolling mill process design, electrical circuit layout and other services.
4, Dispatch technicians to provide installation services after the machine arrives until the customer is satisfied
5, Long-term technical support, long-term machine warranty
2, Provide plant design, proposal, manufacturing, shipping, installation and commissioning services
3, Provide overall equipment layout, rolling mill process design, electrical circuit layout and other services.
4, Dispatch technicians to provide installation services after the machine arrives until the customer is satisfied
5, Long-term technical support, long-term machine warranty
Specification and Technical Parameter | ||||||||
Model | Power | Rolling Speed | Feeding Section | Rolling Specification | ||||
H220-2 | 95KW | 1.5-2 | 40*40mm | Φ10-24mm | ||||
H250-3 | 180kw | 1.8-2.5 | 50*50mm | Φ8-32mm | ||||
H250-4 | 315kw | 2.5-4 | 60*60mm | Φ8-32mm | ||||
Recommend Products
Why Choose Us
Certifications
FAQ
1: Are you the Manufacturer or a trading company?
We are direct manufacturer specialized in produce in machinery for 15 years.Our factory located in high industry zone,Luoyang city,henan province,where is the biggest industry machinery manufacturing base in china.
2: Why should we choose Hongteng?How do you ensure the quality?
We have professional research staff and strict in Production,inspection and debugging and package process.We always insist on supply good pre-sales,order following,after sell service for our customers.
We have professional QC person inspect machinery production.After production finished,all machines will be testing & debugging carefully before shipment.
3: Which kind of power supply do you supply? Electricity or gas?
Electricity, natural gas and LPG
4: How can I trust your company and machine?
Our factory have been in producing machinery for around 15 years ,our machine have exported to East Asia, South Asia, the middle East Asia, Africa etc. areas and have a good feedback with no complaints.
Welcome to visit us,and have a face to face negotiation.
5: How do you control the quality?
We have QC team comply with TQM to ensure the quality. Each step is in compliance to the standards. At the same time, we will take photos and shoot video for you if you need.
6: Which county do you exported to ?
We have already exported our machines to many famous company in many countries, such as
Vietnam, Indonesia, Myanmar, Qatar, Ukraine etc. Welcome customers to visit our factory.
7: How about your after sales service?
After customers get machines,We will send our engineers to customer's workshop.We will supply installation & debugging & training service for customers till machine normal production.
We are direct manufacturer specialized in produce in machinery for 15 years.Our factory located in high industry zone,Luoyang city,henan province,where is the biggest industry machinery manufacturing base in china.
2: Why should we choose Hongteng?How do you ensure the quality?
We have professional research staff and strict in Production,inspection and debugging and package process.We always insist on supply good pre-sales,order following,after sell service for our customers.
We have professional QC person inspect machinery production.After production finished,all machines will be testing & debugging carefully before shipment.
3: Which kind of power supply do you supply? Electricity or gas?
Electricity, natural gas and LPG
4: How can I trust your company and machine?
Our factory have been in producing machinery for around 15 years ,our machine have exported to East Asia, South Asia, the middle East Asia, Africa etc. areas and have a good feedback with no complaints.
Welcome to visit us,and have a face to face negotiation.
5: How do you control the quality?
We have QC team comply with TQM to ensure the quality. Each step is in compliance to the standards. At the same time, we will take photos and shoot video for you if you need.
6: Which county do you exported to ?
We have already exported our machines to many famous company in many countries, such as
Vietnam, Indonesia, Myanmar, Qatar, Ukraine etc. Welcome customers to visit our factory.
7: How about your after sales service?
After customers get machines,We will send our engineers to customer's workshop.We will supply installation & debugging & training service for customers till machine normal production.
Sản phẩm liên quan
Bán chạy
Bán chạy
Máy Trị Liệu Bằng Laser 650nm Dụng Cụ Siêu Âm Y Tế Bán Chạy Giảm Đau Toàn Thân LED Kỹ Thuật Số Loại II Đa Chức Năng
1.384.200đ
Hiệu suất cao giá tốt PE nhựa phim lớp sinopec LLDPE 7042
21.400đ
CZ-318 Nguyên Liệu Nhựa PET Cấp Ép Phun/Để Đóng Gói Vật Liệu Container
19.600đ
Găng Tay Phục Hồi Ngón Tay Robot Thông Minh Thiết Bị Tập Luyện Cổ Tay Tay Và Ngón Tay Cầm Tay
2.322.600đ
858.725.000đ
Số lượng
Số Mô Hình
Số lượng
Chat
Bạn cần đăng nhập để chat với shop
Đăng nhập ngay
858.725.000đ
Số lượng
Số Mô Hình
Số lượng
Bạn có muốn huỷ bỏ đơn hàng này không ?
Đơn hàng bị huỷ bỏ sẽ không được